|Place of Origin:
|Made In China
|Minimum Order Quantity:
|200sets per monthes
|Heating Rate (thermal Reserve Zone):
|It Takes About 35min For RT To Rise To +150℃
|Carton Size : WxHxD(mm):
|For A Single Door, Install A Heating Wire In The Door Frame To Prevent Condensation In The Door Frame At Low Temperature
|Cooling Rate (Cold Storage Area):
|It Takes About 55min For RT To Drop To -40℃
|●External Wall Material: High Quality Carbon Steel Plate, Surface For Electrostatic Color Spray Treatment. The Left Side Of The Box Is φ50mm Diameter Hole ● Inner Wall Material :SUS304# Stainless Steel Plate ● Insulation Material: Hard Polyurethane Foam In
|The W 300×H 400mm Observation Window Is Installed On The Door Of The Box, And Multi-layer Hollow Electrothermal Coated Glass Can Effectively Keep Heat And Prevent Condensation
|Salt Spray Subside:
|Test Room Size:
|NSS.ACSS 35°C ± 1 °C / CASS 50°C ± 1 °C
|NSS.ACSS 35°C ± 1 °C / CASS 50°C ± 1 °C
|AC220V 15A Or Specified By User
|Atered By Itself While Lack Of Water
|Spray Work Time:
|Precise Spray Can Work 2000 Hours Without Crystalled Jam.
|Japanese PVC Environmental Protection & High Anti-aging Capability
|Precisely Digital Thermal Controller With Spray Protection System.
|GB/T5170.8, GB/T2423.17, ISO-3768 3769 3770, ASTM-B117 B268, JIS-D0201 H8502 H8610 K5400 Z2371
|This Tester Is Used For The Surface Erosion Resistance Test Of Kinds Of Material Processed By Paint, Plating, Anodized.
Thermal Shock Test Chamber Air cooled,
250L Thermal Shock Test Chamber
Programmable Thermal Shock Test Chamber for users of the product machine (or components), electrical appliances, instruments, materials, coatings, coatings, etc., for the corresponding climate change test, suitable for electrical, electronic, mechanical industries and other products, parts, materials, etc., high and low temperature, wet and thermal test, simulate temperature and humidity changes under the condition of cold and thermal shock test, so as to evaluate the quality of the test product.
|-40℃ ～ +150℃
Heating rate (thermal reserve zone)
|It takes about 35min for RT to rise to +150℃
Cooling Rate (Cold storage area)
|It takes about 55min for RT to drop to -40℃
Interior dimension :WxHxD(mm)
Carton size :WxHxD(mm)
●External wall material: high quality carbon steel plate, surface for electrostatic color spray treatment. The left side of the box is φ50mm diameter hole
● Inner wall material :SUS304# stainless steel plate
● Insulation material: hard polyurethane foam insulation layer + glass fiber
|For a single door, install a heating wire in the door frame to prevent condensation in the door frame at low temperature
|The W 300×H 400mm observation window is installed on the door of the box, and multi-layer hollow electrothermal coated glass can effectively keep heat and prevent condensation
|Stainless steel sample rack 2 layers, height adjustable, bearing weight 30kg/ layer.
|France Taikang fully closed compressor
|Non-fluorine environmental refrigerant R404A R23 conforms to environmental regulations and is safe and non-toxic
|Safety protection device
|Heater anti-burning protection; Heater overcurrent protection; Circulating fan overcurrent overload protection; Compressor high pressure protection; Compressor overheat protection; Compressor overcurrent protection; Overvoltage underinverse-phase protection; Circuit breaker; Leakage protection
Infinity Machine's IE31100L Programmable Thermal Shock Test Chamber is a universal environmental testing machine for aging test, widely used in Programmable Thermal Shock Test Chamber . This model of environmental test chamber is made in China and has a CE and ISO certification. It comes with a master carton and 1 minimum order quantity. The box door is for a single door and it has a heating wire in the door frame to prevent condensation at low temperature. The heating rate (thermal reserve zone) is 35 minutes for RT to rise to +150℃. The thermal recovery time is within 5 minutes. There are various safety protection devices such as heater anti-burning protection, heater overcurrent protection, circulating fan overcurrent overload protection, compressor high pressure protection, compressor overheat protection, compressor overcurrent protection, overvoltage underinverse-phase protection, circuit breaker, and leakage protection.
Infinity Machine's IE31100L Programmable Thermal Shock Test Chamber can be used for various temperature humidity tests, such as aging test, environmental test, temperature test, and humidity test. It is a reliable and efficient environmental testing machine with precise temperature and humidity control. It is ideal for testing products in extreme temperature and humidity conditions. The thermal shock test chamber is used to simulate a wide range of temperature and humidity conditions, so that products can be tested in different environments.
Infinity Machine's IE31100L Programmable Thermal Shock Test Chamber is the perfect environmental testing machine for those who need to test products in extreme temperature and humidity conditions. It is reliable, efficient and precise, and can be used for a variety of temperature and humidity tests. It is a must-have for any Programmable Thermal Shock Test Chamber.
Packaging and Shipping the Programmable Thermal Shock Test Chamber:
Contact Person: Ms. Anna
Laboratory temperature range: RT+5℃~60℃
Temperature uniformity: ≦1.0℃
Box structure: ●The Inner And Outer Boxes Of The Laboratory: The Inner And Outer Boxes Of The Laboratory Are Made Of Grade A PVC Polyvinyl Board, The Thickness Of The Whole Machine Is 8mm, And The Acid And Alkali Resistance And Temperature Resistance To 78℃. ●Laboratory
Temperature fluctuation: ±0.5℃
Address: No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China
Factory Address:No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China