|Place of Origin:
|Made In China
|Minimum Order Quantity:
|Standard export wooden case with operation manual and video inside.
|Shipped in 15 days after payment
|T/T, D/A, D/P, Western Union, MoneyGram
|200 sets per month
|●The Inner And Outer Boxes Of The Laboratory: The Inner And Outer Boxes Of The Laboratory Are Made Of Grade A PVC Polyvinyl Board, The Thickness Of The Whole Machine Is 8mm, And The Acid And Alkali Resistance And Temperature Resistance To 78℃. ●Laboratory
|Salt Spray Test Chamber
|Safety Protection Device:
|●When The Salt Water Is Low, The Heater Power Is Automatically Cut Off ●When The Temperature Exceeds, The Heater Power Supply Is Automatically Cut Off ●When The Laboratory Water Level Is Low, The Heater Power Supply Is Automatically Cut Off
|Pressure Barrel Temperature Range:
|Carton Size: WxHxD(mm):
|Continuous Spray + Intermittent Spray
|The Laboratory Basket Frame Adopts A Plane Indexing Frame, The Placing Angle Is 15 Degrees And 30 Degrees, And On All Sides The Direction Of Falling Fog And Receiving Fog Is Completely The Same.
|Salt Spray Subside:
|Test Room Size:
|NSS.ACSS 35°C ± 1 °C / CASS 50°C ± 1 °C
|NSS.ACSS 35°C ± 1 °C / CASS 50°C ± 1 °C
|AC220V 15A Or Specified By User
|Atered By Itself While Lack Of Water
|Spray Work Time:
|Precise Spray Can Work 2000 Hours Without Crystalled Jam.
|Japanese PVC Environmental Protection & High Anti-aging Capability
|Precisely Digital Thermal Controller With Spray Protection System.
|GB/T5170.8, GB/T2423.17, ISO-3768 3769 3770, ASTM-B117 B268, JIS-D0201 H8502 H8610 K5400 Z2371
|This Tester Is Used For The Surface Erosion Resistance Test Of Kinds Of Material Processed By Paint, Plating, Anodized.
Lab Salt Spray Test Chamber,
Continuous Salt Spray Test Chamber
The Salt Spray Test Chamber is to simulate the dispersion system composed of tiny salt-containing droplets in the atmosphere, which is widely used in electronic, electrical and automobile, motorcycle, hardware, plastic, FPC soft board, and other industries after electroplating, painting, coating, anodic treatment of salt spray corrosion test to evaluate its surface corrosion resistance
|Laboratory temperature range
|Pressure barrel temperature range
|The amount of salt spray settling
|Continuous spray + intermittent spray
|Effective inner volume of the test
●The inner and outer boxes of the laboratory: the inner and outer boxes of the laboratory are made of grade A PVC polyvinyl board, the thickness of the whole machine is 8mm, and the acid and alkali resistance and temperature resistance to 78℃.
●Laboratory seal cover: The seal cover of the laboratory is made of grade A PVC plate, the thickness is 8mm, the surrounding reinforcement is 13mm, and the acid and alkali resistance and temperature resistance are 78℃
|Open cover system
|One-click automatic cover opening
|Water refill method
|Automatic/manual dual water supply mode, automatic water inlet with a set of water purifier
|The laboratory basket frame adopts a plane indexing frame, the placing Angle is 15 degrees and 30 degrees, and on all sides the direction of falling fog and receiving fog is completely the same.
|Safety protection device
●When the salt water is low, the heater power is automatically cut off
●When the temperature exceeds, the heater power supply is automatically cut off
●When the laboratory water level is low, the heater power supply is automatically cut off
GB/T242317-2008 salt spray test method
GB/T242318-2000 "Basic Regulations of Electrical and Electronic products Test Ka"
GB / T10125-1997 Artificial atmosphere corrosion test salt spray test
GB/T10587-2006 Technical conditions for salt spray test chamber
GB105932-1990 Method for measuring environmental parameters of electrical and electronic products
GB / T1765-1979 Paint film test for determination of resistance to heat, moisture, salt spray and weather (artificially accelerated)
GB/T242317-1993 "Electronic and electrical products basic environmental test procedures Test Ka: salt spray test method"
We provide technical support and service for our Salt Spray Test Chamber products. Our technical support team is available to answer any questions you may have about our products and their functionality. We can provide assistance with installation, troubleshooting, maintenance, and other product-related questions. We also offer a variety of service options, including on-site repair, calibration, and preventive maintenance.
Contact Person: Ms. Anna
Laboratory temperature range: RT+5℃~60℃
Temperature uniformity: ≦1.0℃
Box structure: ●The Inner And Outer Boxes Of The Laboratory: The Inner And Outer Boxes Of The Laboratory Are Made Of Grade A PVC Polyvinyl Board, The Thickness Of The Whole Machine Is 8mm, And The Acid And Alkali Resistance And Temperature Resistance To 78℃. ●Laboratory
Temperature fluctuation: ±0.5℃
Address: No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China
Factory Address:No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China