Send Message
Home News

Maintenance Tips for Temperature & Humidity Chamber

Certification
China Infinity Machine International Inc. certification
Customer Reviews
I want to say that your products are very good. Thank you for all your suggestion, also good after sales service.

—— Mr Cristian Lopetegui

We appreciate for your professional service & higher standard quality control, we are happy to know you.

—— Mr Moses Chanda

I got your inform, Your drop tester looks good, We will working with customers first, Then I will inform you after I have inform, Thank you so much

—— Mr Georg Lehner

Thank you very much for offer! Payment is arranging. I will inform you once completed.

—— Mr Matthew Ho

Thank you very much for your prompt reply, my boss will come to China next month. Expect us to work together again.

—— Mr Naveed Shakeel

I'm Online Chat Now
Company News
Maintenance Tips for Temperature & Humidity Chamber
Latest company news about Maintenance Tips for Temperature & Humidity Chamber

 

Understanding of some maintenance tips for Temperature &Humidity Chamber will be useful for us to deal with

 

some small problems existing. The following will brief you with some maintenance tips for Temperature &

 

Humidity chamber:

 

 

1. As temperature & humidity chamber is normally quite valuable in price, so we suggest placing it in an

 

environment with quite proper temperature condition. 8℃~23℃ is suggested, and the lab that does not meet

 

this temperature conditions shall add proper air conditioner (air-cooling) or cooling tower (water-cooling);

 

2. We suggest arranging professional personal to manage this equipment. And those units, if possible shall

 

arrange special personals to supplier’s site for training and study irregularly so as to gain according

 

professional maintenance skills and experiences;

 

3. Clean the condenser regularly (every 3 months), the condenser of the chamber with air-cooling compressor

 

shall be maintained regularly and we shall clean the dirt and dust on condenser so as to ensure the good heat

 

exchange efficiency; and in addition to ensuring the inlet water pressure and temperature for the water-cooled

 

compressor, the according flow shall also be ensured and the inside of the condenser shall be cleaned

 

regularly so as to ensure its sustainable heat exchange efficiency;

 

4. Regularly( every 3 months) clean the evaporator( dehumidifier), as the items to be tested have various

 

grades of requirement for cleanness, and during the test, the evaporator (dehumidifier) will have some small

 

articles such as dust accumulated under forced circulating airing and shall be regularly cleaned;

 

5. Cleaning and calibration for circulating propeller and condenser: same as evaporator, as the chamber is

 

working in various environments, its circulating propeller and condenser will have much dusts accumulated

 

and shall be regularly cleaned;

 

6. Cleaning for water pipes and humidifier: humidifier is easily burnt if the water pipe is blocked and humidifier

 

have dirt accumulated and normally results in damage of humidifier, so the water pipes and humidifier shall be

 

regularly cleaned;

 

7. After every test, we shall set the atmospheric temperature for chamber and run it for 30min, then cut off the

 

power and clean the internal side of the chamber;

 

8. The relocation of the chamber shall be conducted under the instruction of the technician so as to prevent

 

from unnecessary damage;

 

9. The chamber shall be powered on for at least one hour regularly every 15 days if it is not used for very long

 

time;

 

10. Principles for Maintenance: as the temperature & humidifier consists of electricity, cooling system and

 

mechanical system. The whole equipment shall be completely checked if any problem happens to the

 

equipment, normally, the analysis shall starts from outside to inside, which means that the possible problems

 

concerning with outside could be eliminated first such as cooling water, power supply system and so on. Once

 

the problem concerning with outside are completely eliminated, we shall disassembly the systems and then

 

conduct comprehensive analysis. And the root causes for faults could also be found out by backward tracing

 

method: check the electrical diaphragm to find out if the electricity system has problem then finally check if any

 

problem concerning with cooling system exists. No replacement of any disassembled part shall be done before

 

confirming root cause of the fault in case of the unnecessary troubles;

 

Sales Team


Mobile/WhatsApp:+8618103087812


Tel:+86-(0)769-87796906


E-mail: anna.lu@infinity-machine.com


Infinity Machine International Inc.


Web: www.infinity-machine.com


Add:103 Building 4.Furong industrial Center,Wangniudun Town,Dongguan Guangdong,China

Pub Time : 2017-02-27 15:44:44 >> News list
Contact Details
Infinity Machine International Inc.

Contact Person: Ms. Anna

Tel: +8618103087812

Fax: 86-0769-83428065

Send your inquiry directly to us (0 / 3000)

Contact

Address: No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China

Factory Address:No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China